Load Cell Cables
VISION offers world class Load cell cables that are used for data transmission in load cells for weighing scale purposes. These are designed to carry capacitive signals generated in load cells to display panels. These cables are Processed from high quality tinned copper and special grade of insulation and jacket materials,
these cables transmit accurate signals in TABLE TOP WEIGH SCALES AND TRUCK WEIGH BRIDGES.
TYPE - 1
Conductor
- EC Grade Annealed Tinned Copper
Size
- 22 AWG (7/0.25mm)
- 24 AWG (7/0.20mm)
Insulation
- PVC / MDPE
No. Of Cores
- 4 Cores & 6 Cores
Shield
- Aluminium Backed Mylar Tape
Drain Wire
- 24 AWG Bunched Annealed Tinned Copper
Outer Sheath
- FR Grade PVC
Diameter
- 6.0 mm Nominal
Electrical Parameter
- Conductor Resistance for 22A WG = 52.5 Ohms/km @ 20° C
- Conductor Resistance for 24A WG = 83.20 Ohms/km @ 20° C
- Mutual Capacitance between core & shield <400 NF/km
- Insulation Resistance value >500 MOhms/km
TYPE - 2
Copper Braided Load Cell Cables
Conductor
- EC Grade Tinned Copper Conductor
Size
- 0.25 Sq.mm(7/0.20mm)
- 0.50 Sq.mm(16/0.20mm)
No. Of Cores
- 4, 6 & as per customer specs
Shield
- Tinned Copper Braid 70-80% Coverage
Outer Sheath
- FR Grade PVC Jacket
Diameter
- 6.5 mm/8.0 mm Nominal Depending on number of cores
Jacket Colour
- Black or Gray
Anti-rodent Design - G.I.Braiding/S.S Braiding can be provided to prevent Damage caused by rodents while the cable lies in open areas
Note : The Conductor Size shall be According to the Resistance Value & it's Tolerance specified in IS:8130-1984
APPROVALS
